Digital Photobooth Setup Instructions

• Set case onto level ground and unlock.

• Set the base plate firmly on level ground.

• Place the first column firmly on base plate aligning with screw holes. (Labeled #1)

• Tighten triangular style knobs to base to secure.

• Place second column firmly on top of column #1 and secure with round knobs.

• Place head shell atop column #2 and secure it by locking hooks onto metal joints

• use small triangular screw to secure head shell to column.

• Feed the attached power cable through the hole in the back down to the base and plug into nearest power source.

• Turn on LED ring light by turning knob clockwise on the back of the head shell. Adjust lighting as needed.